文章摘要
张羽霓,王庆庆,唐俊,闫磊,李永亮.应用于传声器阵列定位校准的空间点声源声场拟合方法[J].声学技术,2020,39(4):445~450
应用于传声器阵列定位校准的空间点声源声场拟合方法
Sound field fitting method of spatial point source for microphone array positioning calibration
投稿时间:2019-04-17  修订日期:2019-06-18
DOI:10.16300/j.cnki.1000-3630.2020.04.011
中文关键词: 空间点声源模拟  传声器阵列  声源定位  波束形成算法  传声器阵列校准
英文关键词: sound field reconstructing  microphone array  acoustic array calibration  sound source position  beamforming  microphone array calibration
基金项目:国家自然科学基金(11204010)资助项目。
作者单位E-mail
张羽霓 天津大学建筑工程学院, 天津 300350
天津大学港口与海洋工程天津市重点实验室, 天津 300350 
 
王庆庆 天津大学建筑工程学院, 天津 300350
天津大学港口与海洋工程天津市重点实验室, 天津 300350 
 
唐俊 天津大学建筑工程学院, 天津 300350
天津大学港口与海洋工程天津市重点实验室, 天津 300350 
tangjun@tju.edu.cn 
闫磊 北京航天计量测试技术研究所, 北京 100076  
李永亮 中国电力科学研究院, 北京 100192  
摘要点击次数: 605
全文下载次数: 386
中文摘要:
      介绍了一种用于传声器阵列声源定位精度校准的空间点声源声场模拟方法,并基于该方法设计了一套空间点声源模拟系统,完成了一个传声器阵列的定位位置精度校准。文章采用多通道点声源空间声场合成算法模拟了一个位于自由场空间的点声源,根据传声器阵列中每一个传声器的空间位置坐标,计算出传感器所处位置声场的动态声信号。通过耦合腔标准声源将对应的多通道电压信号输入被校准阵列系统,完成点声源的模拟。然后,该阵列运用波束形成算法进行声源定位,得出点声源的位置,并与模拟点声源的位置进行比对,实现对阵列定位准确性的校准。
英文摘要:
      In this paper, a sound field reconstructing method of spatial point source is introduced to the calibration of microphone array. Based on this method, a set of spatial point source reconstruction system is designed, and the positioning accuracy calibration of a microphone array is completed. In this paper, the spatial sound field synthesis algorithm of multi-channel sound sources is used to simulate a point source in a free spatial sound field. According to the spatial coordinates of each microphone in the microphone array, the dynamic acoustic signal of the sound field at the microphone's position is calculated. The coupling cavity standard sound source inputs the corresponding multi-channel voltage signals into the calibrated microphone array system to simulate point sound sources. By comparing the position of the simulated point source with that obtained by beamforming of the microphone array, the accuracy of microphone array positioning can be calibrated.
查看全文   查看/发表评论  下载PDF阅读器
关闭