文章摘要
霍彦明,吴敏,宋文章,叶兆雄,王智彪.HIFU聚焦探头声场功率测量的凹锥面反射靶设计分析[J].声学技术,2003,(1):11~13
HIFU聚焦探头声场功率测量的凹锥面反射靶设计分析
Design of concave cone reflector for HIFU ultrasonic transducer power measurement
投稿时间:2001-04-05  修订日期:2001-09-12
DOI:
中文关键词: 高强度聚焦超声  声功率  凹锥面反射靶
英文关键词: Aight Intensity Focused Ultrasound  ultrasonic power  concave cone reflector
基金项目:国家"九五"科技攻关项目(96-905-02-01);国家自然科学基金委重点项目(39630340)资助
作者单位
霍彦明 重庆医科大学医学超声工程研究所, 重庆, 400016 
吴敏 重庆医科大学医学超声工程研究所, 重庆, 400016 
宋文章 重庆医科大学医学超声工程研究所, 重庆, 400016 
叶兆雄 重庆医科大学医学超声工程研究所, 重庆, 400016 
王智彪 重庆医科大学医学超声工程研究所, 重庆, 400016 
摘要点击次数: 1058
全文下载次数: 1055
中文摘要:
      在HIFU聚焦探头声功率测量中,常用吸收靶来进行声功率测量。锥面反射靶是辐射压力法测量大功率超声功率常用的反射靶面,本文分析了凹锥面反射靶的设计参数与HIFU聚焦探头参数之间的关系,为这种靶面参数设计提供了理论依据。本文分析中未计及靶材及厚度对测量结果的影响。
英文摘要:
      In measuring ultrasonic power of HIFU transducers,absorbing targets are often used.Cone reflectors are generally employed in measurements of high ultrasonic power using radiation pressure methods.This paper presents the relationship between parameters of the cone reflector and a focused transducer.It is the bases of the target design.In this discussion,effects of the reflector material and its thickness on the measurements are not taken into account.
查看全文   查看/发表评论  下载PDF阅读器
关闭