文章摘要
赵明利,程雪利,赵波.带工具头超声变幅杆节点定位偏差问题分析[J].声学技术,2013,32(3):253~256
带工具头超声变幅杆节点定位偏差问题分析
Research on the node localization deviation of the ultrasonic amplitude transformer with tool head
投稿时间:2012-06-16  修订日期:2012-08-30
DOI:10.3969/j.issn1000-3630.2013.03.016
中文关键词: 节点  变幅杆  超声  有限元
英文关键词: node  amplitude transformer  ultrasonic  finite element
基金项目:国家自然科学基金资助项目(50975080)。
作者单位E-mail
赵明利 河南理工大学机械与动力工程学院, 河南焦作 454000 zhaomingli@hpu.edu.cnl 
程雪利 河南机电高等专科学校机械工程系, 河南新乡 453000  
赵波 河南理工大学机械与动力工程学院, 河南焦作 454000  
摘要点击次数: 1781
全文下载次数: 2203
中文摘要:
      节点位置是变幅杆设计的关键参数, 该位置通常用来设置法兰盘, 从而实现变幅杆与其他机构的有效连接。传统解析法通常将变幅杆轴线上位移为零的点作为节点, 但在试验中发现, 用解析法确定的节点位置往往存在较大的振动位移。在解析法的基础上对带工具头变幅杆进行设计, 并借助于有限元软件对变幅杆进行分析研究, 研究表明带工具头变幅杆的节点位置存在定位偏差, 轮廓线与轴线上节点位置不重合, 对频率为35kHz的变幅杆而言, 其轮廓线上节点向变幅杆小端偏移1.5mm。试验现象表明, 相对轴线节点, 在轮廓上的节点位置来设置法兰盘可降低系统能量耗散, 提高系统稳定性。
英文摘要:
      The node position is a key parameter in designing an amplitude transformer. At this position, a ring flange is usually set up to realize the effective connection of the amplitude transformer with other parts. In the traditional analytic method, the zero displacement point of amplitude transformer axis is usually considered as a node. But in experiments, it is found that the node vibrates with a larger displacement. In this paper, the amplitude transformer with tool head is designed based on the analytic method with finite element software. The research shows that the node of the amplitude transformer is deviated to some extent. That is to say, the node on the contour line doesn’t coincide with that on the axis. For a 35 kHz amplitude transformer, the node on contour line is deviated by 1.5 mm toward the small end of the amplitude transformer. Experiments show that relative to the axis node, setting the ring flange at the contour node can reduce the energy dissipation and improve the stability of the system.
查看全文   查看/发表评论  下载PDF阅读器
关闭