周翔,沈建国,陈丽华.基于STM32的大功率超声间歇式控制信号[J].声学技术,2013,32(5):395~399 |
基于STM32的大功率超声间歇式控制信号 |
STM32 based intermittent control signals for high-power ultrasound |
投稿时间:2012-07-02 修订日期:2012-09-27 |
DOI:10.3969/j.issn1000-3630.2013.05.008 |
中文关键词: STM32单片机 压电换能器 石油开发 间歇式 大功率超声 |
英文关键词: STM32 single chip piezoelectric transducer oil development intermittent-type high-power ultrasonic |
基金项目:863计划资助项目(2007AA06Z226) |
|
摘要点击次数: 1461 |
全文下载次数: 2703 |
中文摘要: |
在石油开发过程中,大功率超声能够有效地对堵塞的渗透层进行解堵,提高地层的渗透性,增加注水井的注水能力或采油井的产液量,提高原油产量。系统以STM32单片机为核心,产生大功率超声需要的两路间歇式控制信号。这两路信号的相位差为180°,“死区时间”均为3μs,控制大功率超声电源中的IGBT驱动电路。将该控制电路接入大功率超声系统后,大功率超声系统能正常工作,设备运行稳定,能基本满足工业应用的要求。 |
英文摘要: |
In oil extraction process, high-power ultrasound can effectively unblock permeable bed, improve stratum's permeability, increase the injection rate of water-injection well or the liquid yield of oil well, and therefore raise the production of petroleum. In this oil extraction system, the STM32 single-chip is taken as the core device to generate two intermittent control signals for the operation of a high-power ultrasonic source. These two signals, of which the phase difference is 180°and the dead time is 3μs, control the IGBT driving circuit in high-power ultrasonic source. It is shown that by connecting the control circuit to this high-power ultrasonic source, the whole system works well, and so the system can basically satisfy the demand of industrial application. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|