文章摘要
王小宁,杨道军,许伟杰,翁国忠.外压薄壁圆筒水密舱设计论证[J].声学技术,2014,33(6):499~503
外压薄壁圆筒水密舱设计论证
Design demonstration of a thin-walled cylinder watertight compartment under external pressure
投稿时间:2014-02-26  修订日期:2014-05-09
DOI:10.3969/j.issn1000-3630.2014.06.004
中文关键词: 强度  刚度  失稳  临界长度  仿真
英文关键词: strength  stiffness  buckling  critical length  simulate
基金项目:
作者单位E-mail
王小宁 广东湛江91388部队, 广东湛江 524022 wxnhhh@126.com 
杨道军 上海航保修理厂, 上海 200083  
许伟杰 中国科学院声学研究所东海研究站, 上海 200032  
翁国忠 中国科学院声学研究所东海研究站, 上海 200032  
摘要点击次数: 1236
全文下载次数: 1690
中文摘要:
      外压薄壁圆筒水密舱在工况条件下能够安全承压的必要条件是构件具有足够的强度和刚度,否则构件加载后将分别发生屈服破坏和失稳.其他条件不变时构件的临界长度决定了失稳临界压力大小.因此,工程设计前首先要对构件强度和刚度进行研究和仿真.
英文摘要:
      For a thin thickness cylinder cabin under external pressure, it is essential in the normal condition to ensure the components of the cabin having enough strength and stiffness. The components under the normal pressure will yield if no enough strength and they will buckle if no enough stiffness. The critical lengths of the components decide their critical pressures when the components keep in original conditions. Therefore, it is right and necessary to research and to simulate strength and stiffness of the components first, and then to get the theoretical basis for engineering design.
查看全文   查看/发表评论  下载PDF阅读器
关闭