文章摘要
李志强,莫喜平,张运强,崔斌,潘耀宗,李鹏.嵌入式外部驱动IV型弯张换能器设计[J].声学技术,2015,34(6):566~569
嵌入式外部驱动IV型弯张换能器设计
Design of grooved outboard-driven class IV flextensional transducer
投稿时间:2014-12-18  修订日期:2015-02-16
DOI:10.16300/j.cnki.1000-3630.2015.06.019
中文关键词: 嵌入式  外部驱动  小尺寸  弯张换能器
英文关键词: grooved  outboard-driven  small size  flextensional transducer
基金项目:国家自然科学基金(11304350)、青年促进会基金资助项目
作者单位E-mail
李志强 中国科学院声学研究所, 北京 100190
中国科学院大学, 北京 100190 
 
莫喜平 中国科学院声学研究所, 北京 100190 mxp@mail.ioa.ac.cn 
张运强 中国科学院声学研究所, 北京 100190  
崔斌 中国科学院声学研究所, 北京 100190  
潘耀宗 中国科学院声学研究所, 北京 100190  
李鹏 中国科学院声学研究所, 北京 100190  
摘要点击次数: 1207
全文下载次数: 1260
中文摘要:
      为了减小外部驱动IV型弯张换能器长度,提高此类换能器的实用性,提出在弯张壳长轴方向设计一U型凹槽、驱动单元置于凹槽内驱动的方案。利用有限元软件重点分析U型凹槽尺寸对换能器谐振频率和体积位移的作用规律,同时结合水中模型的发射电压响应,设计了一款谐振频率为2.2 kHz、-3 dB带宽为330 Hz的嵌入式外部驱动IV型弯张换能器。这种结构的换能器不仅吸收了已有外部驱动IV型弯张换能器的优点,还弥补了其长度尺寸过大的缺陷。
英文摘要:
      To reduce the length of outboard-driven class IV flextensional transducer and to improve the practicality, a solution of setting a U-shaped groove at the macro axis of the ellipse shell and appending the driven unit into the bottom of the groove is presented. How the size of the groove affects the transducer's resonant frequency and volume displacement is analyzed especially with the help of finite element software. Furthermore, according to the transmitting voltage response of the underwater model, an outboard-driven class IV flextensional transducer with a resonant frequency at 2.2 kHz and a bandwidth of 330 Hz is designed. Beside having the advantages of the existing outboard-driven class IV flextensional transducer, this new structured transducer can also remedy the weakness of the traditional one in size too large.
查看全文   查看/发表评论  下载PDF阅读器
关闭