文章摘要
张宁宁.三叠片压电复合换能器弯曲振动的比较研究[J].声学技术,2017,36(4):383~389
三叠片压电复合换能器弯曲振动的比较研究
Research on flexural vibration characteristics of three laminated piezoelectric transducers
投稿时间:2016-12-19  修订日期:2017-03-30
DOI:10.16300/j.cnki.1000-3630.2017.04.015
中文关键词: 瑞利法  谐振频率  有效机电耦合系数  有限元模拟
英文关键词: Rayleigh method  resonant frequency  effective electromechanical coupling coefficient  finite element simulation
基金项目:国家自然科学基金资助项目(11074158)、陕西省军民融合研究基金项目(17JMR35)、渭南师范学院校级项目(17YKS08)、渭南师范学院校级教改项目(JG201648)
作者单位E-mail
张宁宁 渭南师范学院数理学院, 陕西渭南 714099 zhangning7892@163.com 
摘要点击次数: 1221
全文下载次数: 1126
中文摘要:
      用瑞利法对三叠片弯振圆盘换能器在三种不同边界条件下的振动特性进行理论研究,推导了谐振频率及有效机电耦合系数的表达式,通过数值计算分析了复合换能器的谐振频率及有效机电耦合系数随换能器各结构参数的变化规律并进行比较研究,同时将计算结果与有限元模拟结果比较,结果表明不同边界条件下换能器的结构参数对谐振频率和有效机电耦合系数影响不同:在换能器结构参数一定时,自由边界条件下谐振频率最大,简支边界条件下最小,固定边界条件下次之;有效机电耦合系数随着金属片厚度、陶瓷片厚度和陶瓷片半径变化时,分别有一个最大值;其他参数一定时,有效机电耦合系数在简支边界条件下最大,自由边界条件下的值稍大于固定边界条件下的值。上述研究结果可为三叠片弯曲振动换能器的设计和实际应用提供一定的理论支持。
英文摘要:
      Three laminated plate transducer is studied under three different boundary conditions and the expressions of the resonant frequency and the effective electromechanical coupling coefficient are derived by using Rayleigh method. Transducer resonant frequency and effective electromechanical coupling coefficient are analyzed and compared with the variation of the structure parameters of the transducer by means of numerical calculation, and the calculated results are compared with the results of finite element simulation. The results show that the effects of structural parameters under different boundary conditions of the transducer on the resonance frequency and the effective electromechanical coupling coefficient are different:for fixed structural parameters of the transducer, the resonant frequency is the greatest in free boundary condition, the next in fixed boundary condition and the minimum in simply supported boundary condition; the effective electromechanical coupling coefficient varies with the thickness of sheet metal and the thickness and radius of ceramic piece, and each has a maximum value; when other parameters are certain, the effective electromechanical coupling coefficient is the greatest in simply supported boundary condition, and the coefficient value in the free boundary condition is slightly larger than that in the fixed boundary condition. The above-mentioned results provide a theoretical support for the design and application of three laminated bending vibration transducer.
查看全文   查看/发表评论  下载PDF阅读器
关闭